2-vejs Coaxial Full-Range bilhøjttaler

Proprietary Plus One« cones
Vented woofer motor structure
Titanium-laminate tweeter
UniPivotT (patent no. 6,002,780) rotating tweeter
Improved I-MountT (patent no. 5,859,917) tweeter-mounting system

JBL GT5-652:
Size 165mm
Nominal Impedance 4 Ohms
Power Handling, Peak 135W
Power Handling, RMS 45W
Sensitivity (2.83V/1m) 93dB
Frequency Response 55Hz - 20kHz
Mounting Depth 56mm 

6.50" Prime Full-Range højt.sæt

Disse 6.5" Prime full-range højttalere giver Rockford Fosgate lydkvalitet på en fantastisk værdi. Perfekt til opgradering af bilens originale højttalere, de har Mica sprøjtestøbt polypropylen cone-enhed og en "mylar balancet" diskant. Inkl. højttalergitre, så de ser lige så godt ud som de lyder!

 

 

2-Way Component Systems

Proprietary Plus One« cones
Vented woofer motor structure
Titanium-laminate tweeter
Edge-driven tweeters (component systems)
Outboard crossovers (component systems)
Improved I-MounT (patent no. 5,859,917) tweeter-mounting system

General
Size 165mm
Nominal Impedance 4 Ohms
Power Handling, Peak 120W
Power Handling, RMS 40W
Sensitivity (2.83V/1m) 91dB
Frequency Response 70Hz - 20kHz
Mounting Depth 53mm

 

 

6-1/2 "(160mm) 2-Way Component System byder Plus One ® WOOFER Cone, 1" My-Ti T Edge-drevet Dome diskant, I-Mount T monterings system og påhængsmotorer Crossover system.

Plus One ® (patentanmeldt) basenhed kegler - Det GTO608C's midwoofer har en kegle med mere areal end det, der findes på konkurrerende modeller af samme størrelse. Fordelene ved Plus One kegler er større effektivitet og bas output.

Computer-optimeret stemme matchede passive delefilter - Det GTO608C træk en påhængsmotorer crossover, der er blevet voice-matchede at sikre optimal overgangsperioderne fra midwoofer til diskant.

My-Ti T (Mylar ® / titanium komposit) diskantenheder - Stiv og lys, og ekstremt effektive, de nye JBL ® Min-Ti diskanter levere højfrekvensroamere forlængelse af titanium domes og dæmpning af komposit membraner. Disse er ikke almindeligt anvendt w-domes, men fuld kant-drevet domes som dem der findes i højere kvalitet home audio højttalere. Fordelene er større magt håndtering, reduceret forvrængning og øget effektivitet. Denne teknologi giver også mulighed for en bedre integration med midwoofer.

I-Mount T (patent no. 5859917) diskant-montering system - Dette velgennemtænkt system tillader nem og alsidig installation af diskant i GTO608C komponent system. Denne komponent system også en ejendomsretligt nye Starfish T diskant montere, hvilket gør det muligt for diskant der skal installeres i en bred vifte af fabrikken steder.

True Fire Ohm - GTO serie højttalerne kan sikkert drevet af enhver hoved enhed.

SPECIFIKATIONER

Power Handling, RMS 70 Watts
Power Handling, Peak 210 Watts
Frequency Response (± 3dB) 50Hz - 21kHz
Følsomhed 92dB
Mounting Depth 52mm Midwoofer, 25mm diskant
Diameter 129mm Midwoofer, 43mm diskant
Impedans 2 ohm 

JBL P6562

165mm (6-1/2") 2-Way Loudspeaker with Plus One® HCLT Woofer Cone and high-bandwidth edge-driven textile-dome tweeter

HCLT woofer cone - This breakthrough material consists of two woven-glass-fiber layers with an epoxy-coated Nomex® honeycomb core. Exceptionally stiff, yet lightweight, it offers increased efficiency, exceptional midrange clarity and lower distortion at high output levels.

Oversized voice coils and spider integrated tinsel leads - The P6562 features a voice coil larger than that found on competing models of the same size. This larger voice coil increases power handling while minimizing distortion. The spider integrated tinsel leads greatly enhance reliability and eliminate audible tinsel-lead slap.

Plus One® (patent pending) woofer cones - The P6562 uses a cone with more surface area than that found in competing models of the same size. The benefit is increased bass output and increased efficiency.

Computer-optimized voice-matched passive crossover - The P6562 comes equipped with an outboard crossover that has been voice-matched to ensure optimium imaging, clairty and detail.

High-bandwidth edge-driven textile-dome tweeters - These are not commonly used miniature cone tweeters, but full edge-driven domes like those found in high-end home audio loudspeakers. The benefits of this full edge-driven topology are reduced distortion at high output levels and superior integration with the mid/woofer. The P6562 also features a tweeter-level control, which allows the tweeter-output level to match personal preference and mounting location.

True Four Ohms - All Power Series® speakers feature two-ohm voice coils. Original factory-installed speaker wiring in many cars is 18-22 gauge. This wire, and heating in the voice coil when power is applied, increases the impedance "seen" by the amplifier or head unit. The impedance of Power Series has been adjusted to compensate for this increase and can be safely driven by any head unit.

JBL P6562
Power Handling, RMS 75 Watts
Power Handling, Peak 225 Watts
Sensitivity 93dB
Frequency Response (±3dB) 45Hz - 23kHz
Mounting Depth 61mm
Diameter 165mm
Impedance 2 Ohms
 

6-1/2" (160mm) 2-Way Component Speaker System

The woofer cone developed for the C608GTi MKII is anodized aluminum. This material moves the first-modal cone-body breakup to a high frequency outside the operating band, significantly reducing distortion and maximizing midrange clarity.

An optimized nitrobutylene (NBR) low-loss surround material is used to damp cone breakup modes.

A 2" aluminum edge-wound voice coil is used. Using this ribbon-shaped aluminum wire allows us to precisely specify the number of windings in the magnetic gap optimizing motor force for high efficiency and low distortion.

The tweeter featured in the C608GTi MKII system uses a pure titanium dome suspended by a rubber surround to optimize output and reduce distortions that travel along the tweeter's dome.

The C608GTi MKII utilizes an outboard crossover with a 3500Hz fouth-order Linkwitz-Riley acoustic alignment. Air-core inductors are used to reduce magnetic saturation under high-power conditions and polypropylene capacitors ensure near ideal characteristics with low equivelent series resistance (ESR). The crossover also features impedance compensation and a tweeter protection circuit. Tweeter level may be adjusted for flat response +2dB or -2dB.

The C608GTi MKII midrange/woofer cone also features Plus One (patent pending) technology, which provides up to 30% more cone area than competing speakers of the same size. Speaker with Plus One deliver higher efficiency and more bass output.

The Tweeter in the C608GTi MKII component system features the I-Mount (patent no. 5,859,9170) tweeter-mounting system. This system facilitates easy and versatile tweeter installation (surface, flush, or flush angled).