4 kanals forstærkere. Stort udvalg

Luk X

280-Watt 4-Kanals Full-Range bilforstærker med indbygget elektronisk Crossover og variable Basfremhævning.

Den GTO504 er konstrueret til at sikre optimal effekt levering i talrige impedances med lave forvrængning. Det kommer outfitted med variable 12dB per oktav elektronisk delefilter giver dig mulighed for at optimere systemet tuning baseret på højttaler placering og ledsagende højttaleren komponenter. Hele spektret Preamp udgange er forudsat lette flere forstærker Tilslutninger uden behov for høj-tab Y-adaptere eller signal splittere. Den GTO504 er et godt valg hvis du søger at øge produktionen af din nuværende bil audio system. For yderligere at forbedre systemets ydeevne, vi vil foreslå, at du også tilføje et par JBL's GTO højtalere.

Den GTO504 også funktioner direkte slutte, som tillader brug af op til 4-gauge magt og jord kabel for at sikre nok saft bliver leveret. Direkte forbinde højttaler terminaler bruges også eliminerer behovet for ekstra adaptere eller specielle fittings. Fælles-dimension forstærker fodspor bruges på alle de GTO modeller giver to fælles dimensioner for ultra rene flere forstærker model anlæg.

Udgangseffekt 55 W RMS x 4 kanaler ved 4 ohm; 70W RMS x 4 kanaler ved 2 ohm, 140W RMS x 2 kanaler ved 4 ohm
Signal-støj (dBA) 105dBA (reference mærkeeffekt i 4 ohm)
THD 0.02% (nominel effekt ved 4 ohm); ≤ 1% (bridged 2 kanal mode)
Frekvensgang 10Hz - 100kHz (-3dB)
Mål (L x B x H) 13-3/16 "x 10-3/8" x 2-1/8 "

Luk X

Rockford Fosgate forstærker med utrolig stor "value for money" værdi. Den R300-4 4-kanals forstærkeren er så alsidig, at det bliver den eneste forstærker dit system har brug for. Full-range eller komponent-højttalere på front-kanalerne og en enkelt R1S410 10" eller R1S412 12" basenhed brokoblet/mono på bagsiden. Tjek vores RFTECH: WOOFER WiringWizard på rockfordfosgate.com for at få mest ud af din forstærker

Luk X

Specifikationer:

CEA-2006 Compliant
Number of Channels 4
Rated Power
continuous power 50W x 4 @ 4-Ohms RMS
100W x 4 @ 2-Ohms RMS
200W x 2 @ 4-Ohms bridged RMS
Total Power
total sum of 'rated power' 400 Watts
Dynamic Power
powercube measurement (info) Front Channels
86 Watts x 2 @ 4-Ohms 0° Res
144 Watts x 2 @ 2-Ohms 0° Res

Rear Channels
85 Watts x 2 @ 4-Ohms 0° Res
142 Watts x 2 @ 2-Ohms 0° Res
Bridgeable Yes
Efficiency (average) 71% @ 4-Ohm
70% @ 2-Ohm
Crossover Controls Front High-Pass (HP): 50Hz-500Hz 12dB/octave Butterworth
Front Low-Pass (LP): 50-500Hz 12dB/octave Butterworth
Rear High-Pass (HP): 50Hz-500Hz 12dB/octave Butterworth
Rear Low-Pass (LP): 50-500Hz 12dB/octave Butterworth
Tone Controls Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Front Punch EQ2 Treble: 0dB to +12dB @ 12kHz
Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Rear Punch EQ2 Treble: 0dB to +12dB @ 12kHz
Function depends upon LP/AP/HP switch position
Signal Input Low level: 2 RCA pair
Signal Output n/a
Power Input Connector Block
Power Wire Gauge 4 AWG
Speaker Output Connector Screw terminal barrier strip
Speaker Wire Gauge 8 AWG to 18 AWG
Heat Sink Type Cast aluminum
Cooling Convection
Remote Controls Optional PEQ Remote Punch EQ
(overrides built-in Punch EQ2 for rear channels only)
Visual Indicators Power
Thermal
Protect
Circuit Topology Class Class A/B
Frequency Response 20Hz to 20kHz +/- 1.0dB
Shipping Weight 8.89 Lbs.
(4.03 Kg.)
Dimensions (HxWxL) 2.25 x 7.625 x 13.02 (in)
5.71 x 19.37 x 33.07 (cm)

Luk X

Specifikationer:

CEA-2006 Compliant
Number of Channels 4
Rated Power
continuous power 50W x 4 @ 4-Ohms RMS
100W x 4 @ 2-Ohms RMS
200W x 2 @ 4-Ohms bridged RMS
Total Power
total sum of 'rated power' 400 Watts
Dynamic Power
powercube measurement (info) Front Channels
86 Watts x 2 @ 4-Ohms 0° Res
144 Watts x 2 @ 2-Ohms 0° Res

Rear Channels
85 Watts x 2 @ 4-Ohms 0° Res
142 Watts x 2 @ 2-Ohms 0° Res
Bridgeable Yes
Efficiency (average) 71% @ 4-Ohm
70% @ 2-Ohm
Crossover Controls Front High-Pass (HP): 50Hz-500Hz 12dB/octave Butterworth
Front Low-Pass (LP): 50-500Hz 12dB/octave Butterworth
Rear High-Pass (HP): 50Hz-500Hz 12dB/octave Butterworth
Rear Low-Pass (LP): 50-500Hz 12dB/octave Butterworth
Tone Controls Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Front Punch EQ2 Treble: 0dB to +12dB @ 12kHz
Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
Rear Punch EQ2 Treble: 0dB to +12dB @ 12kHz
Function depends upon LP/AP/HP switch position
Signal Input Low level: 2 RCA pair
Signal Output n/a
Power Input Connector Block
Power Wire Gauge 4 AWG
Speaker Output Connector Screw terminal barrier strip
Speaker Wire Gauge 8 AWG to 18 AWG
Heat Sink Type Cast aluminum
Cooling Convection
Remote Controls Optional PEQ Remote Punch EQ
(overrides built-in Punch EQ2 for rear channels only)
Visual Indicators Power
Thermal
Protect
Circuit Topology Class Class A/B
Frequency Response 20Hz to 20kHz +/- 1.0dB
Shipping Weight 8.89 Lbs.
(4.03 Kg.)
Dimensions (HxWxL) 2.25 x 7.625 x 13.02 (in)
5.71 x 19.37 x 33.07 (cm)

Luk X

Specifikationer:

CEA-2006 Compliant
Number of Channels 4
Rated Power
continuous power 100W x 4 @ 4-Ohms RMS
150W x 4 @ 2-Ohms RMS
300W x 2 @ 4-Ohms bridged RMS
2-Ohms x 2 bridged Stable
Total Power
total sum of 'rated power' 600 Watts
Dynamic Power
powercube measurement (info) Front Channels
139 Watts x 2 @ 4-Ohms 0° Res
236 Watts x 2 @ 2-Ohms 0° Res

Rear Channels
140 Watts x 2 @ 4-Ohms 0° Res
236 Watts x 2 @ 2-Ohms 0° Res
Bridgeable Yes
Efficiency (average) 70% @ 4-Ohm
64% @ 2-Ohm
Crossover Controls Front High-Pass (HP): 50-500Hz 24dB/octave Butterworth
Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth
Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
Tone Controls Front Channels - Punch EQ
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz

Rear Channels - Punch EQ
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz
Signal Input Front Low level: 1 RCA pair
Rear Low level: 1 RCA pair
Signal Output Low Level: 1 RCA pair
Power Input Connector Block
Power Wire Gauge 4 AWG
Speaker Output Connector Screw terminal barrier strip
Speaker Wire Gauge 8 AWG to 18 AWG
Heat Sink Type Cast aluminum
Cooling Convection
Remote Controls Optional Remote Punch EQ
(overrides rear channel built-in Punch EQ)
Visual Indicators Power
Thermal
Protect
Circuit Topology Class Class A/B
Frequency Response 20Hz to 20kHz +/- 1dB
Shipping Weight 12.00 Lbs.
(5.44 Kg.)
Dimensions (HxWxL) 2.14 x 8.14 x 14.91 (in)
5.42 x 20.68 x 37.86 (cm)

Søgning

E-mærket

Finansiering

Indkøbsvogn:

Kundeservice:

Søgning

E-mærket

Finansiering

Indkøbsvogn:

Nyhedsbrev:

Kundeservice: