JBL højttaler P6562
VEJL
1199
,-
SPAR
300
,-
KUN
899
,-
JBL P6562
165mm (6-1/2") 2-Way Loudspeaker with Plus One® HCLT Woofer Cone and high-bandwidth edge-driven textile-dome tweeter
HCLT woofer cone - This breakthrough material consists of two woven-glass-fiber layers with an epoxy-coated Nomex® honeycomb core. Exceptionally stiff, yet lightweight, it offers increased efficiency, exceptional midrange clarity and lower distortion at high output levels.
Oversized voice coils and spider integrated tinsel leads - The P6562 features a voice coil larger than that found on competing models of the same size. This larger voice coil increases power handling while minimizing distortion. The spider integrated tinsel leads greatly enhance reliability and eliminate audible tinsel-lead slap.
Plus One® (patent pending) woofer cones - The P6562 uses a cone with more surface area than that found in competing models of the same size. The benefit is increased bass output and increased efficiency.
Computer-optimized voice-matched passive crossover - The P6562 comes equipped with an outboard crossover that has been voice-matched to ensure optimium imaging, clairty and detail.
High-bandwidth edge-driven textile-dome tweeters - These are not commonly used miniature cone tweeters, but full edge-driven domes like those found in high-end home audio loudspeakers. The benefits of this full edge-driven topology are reduced distortion at high output levels and superior integration with the mid/woofer. The P6562 also features a tweeter-level control, which allows the tweeter-output level to match personal preference and mounting location.
True Four Ohms - All Power Series® speakers feature two-ohm voice coils. Original factory-installed speaker wiring in many cars is 18-22 gauge. This wire, and heating in the voice coil when power is applied, increases the impedance "seen" by the amplifier or head unit. The impedance of Power Series has been adjusted to compensate for this increase and can be safely driven by any head unit.
JBL P6562
Power Handling, RMS 75 Watts
Power Handling, Peak 225 Watts
Sensitivity 93dB
Frequency Response (±3dB) 45Hz - 23kHz
Mounting Depth 61mm
Diameter 165mm
Impedance 2 Ohms
165mm (6-1/2") 2-Way Loudspeaker with Plus One® HCLT Woofer Cone and high-bandwidth edge-driven textile-dome tweeter
HCLT woofer cone - This breakthrough material consists of two woven-glass-fiber layers with an epoxy-coated Nomex® honeycomb core. Exceptionally stiff, yet lightweight, it offers increased efficiency, exceptional midrange clarity and lower distortion at high output levels.
Oversized voice coils and spider integrated tinsel leads - The P6562 features a voice coil larger than that found on competing models of the same size. This larger voice coil increases power handling while minimizing distortion. The spider integrated tinsel leads greatly enhance reliability and eliminate audible tinsel-lead slap.
Plus One® (patent pending) woofer cones - The P6562 uses a cone with more surface area than that found in competing models of the same size. The benefit is increased bass output and increased efficiency.
Computer-optimized voice-matched passive crossover - The P6562 comes equipped with an outboard crossover that has been voice-matched to ensure optimium imaging, clairty and detail.
High-bandwidth edge-driven textile-dome tweeters - These are not commonly used miniature cone tweeters, but full edge-driven domes like those found in high-end home audio loudspeakers. The benefits of this full edge-driven topology are reduced distortion at high output levels and superior integration with the mid/woofer. The P6562 also features a tweeter-level control, which allows the tweeter-output level to match personal preference and mounting location.
True Four Ohms - All Power Series® speakers feature two-ohm voice coils. Original factory-installed speaker wiring in many cars is 18-22 gauge. This wire, and heating in the voice coil when power is applied, increases the impedance "seen" by the amplifier or head unit. The impedance of Power Series has been adjusted to compensate for this increase and can be safely driven by any head unit.
JBL P6562
Power Handling, RMS 75 Watts
Power Handling, Peak 225 Watts
Sensitivity 93dB
Frequency Response (±3dB) 45Hz - 23kHz
Mounting Depth 61mm
Diameter 165mm
Impedance 2 Ohms
